PLA+ 3D printing consumables adopt a new generation of PLA+ consumables, which are more demanding and tougher, and the elongation at break reaches 23%. The wire diameter is controlled at 1.75±0.02mm, the wires are arranged neatly without jamming, and the printing is smoother. The new formula material improves the thermal stability so that the softening temperature of the PLA wire reaches 140 degrees, and the cold-end wire will not soften, which fundamentally solves the problem of plugging. The wire is made of imported raw materials that are environmentally friendly and degradable and do not produce harmful gases. The wire has high compatibility and wide adaptability and is compatible with all ELEGOO FDM models.

PLA+ parameters:

Density: 1.25g/cm³

Melt index: 10(190/2.16kg)g/10min

Tensile strength: ≥ 60 MPa

Elongation at break: 23%

Bending strength: 76MPa

Flexural modulus: 1911MPa

Izod notched impact strength: 9 kj/m²

Heat distortion temperature: 53°C (0.45MPa)

Fan: 100%

Line length: (1.75mm) 330-335m